Search found 10 matches
- Sun Jul 11, 2004 3:22 am
- Forum: Questions before purchasing the plans and announcements..
- Topic: Plans have to be approved in France
- Replies: 2
- Views: 927
Salut (Hi) marin d'eau douce, You're not stricly speaking right : plans do not need to be approved in France. It helps if they are, but it is still easy to have the boat homologated even if plans are not approved. You're perfectly entitled to design yourself your boat. There is no need to have the b...
- Mon Jun 14, 2004 6:10 pm
- Forum: Builder's Small Boats
- Topic: C12 Kanevedenn launched
- Replies: 11
- Views: 6344
Hi, For the shake of interest of possible C12 french builders, note that Kanevedenn, my C12, has successfully passed the security and safety controls required to allow her to be legally registered. She is now allowed to be sailed at sea up to 2 nautic miles (about 3.3 kilometers) from the coast, whi...
- Thu Jun 03, 2004 2:49 pm
- Forum: Small Boats
- Topic: C12 Building Costs
- Replies: 7
- Views: 2206
- Sat May 22, 2004 2:09 am
- Forum: Builder's Small Boats
- Topic: C12 Kanevedenn launched
- Replies: 11
- Views: 6344
- Fri May 21, 2004 5:47 pm
- Forum: Builder's Small Boats
- Topic: C12 Kanevedenn launched
- Replies: 11
- Views: 6344
C12 Kanevedenn launched
Hi all, I'm very proud to announce the launching of my C12 "Kanevedenn" (a briton word to say "rainbow"). Here are some pictures and comments. The pictures first : http://gallery.bateau2.com/albums/userpics/10414/Dscn0178.jpg http://gallery.bateau2.com/albums/userpics/10414/Dscn0...
- Wed Feb 04, 2004 3:55 pm
- Forum: Small Boats
- Topic: C12: position of shrouds tangs on mast ?
- Replies: 4
- Views: 1297
Jacques, Thanks for your quick answer. You wrote : If that does not reassure you, you can always turn your halyard around the mast cleat without going through the block at the bow. In that case, it just means that there is no forestay nor anything to compensate the sail pulling the mast aft. Is this...
- Wed Feb 04, 2004 3:10 pm
- Forum: Small Boats
- Topic: C12: position of shrouds tangs on mast ?
- Replies: 4
- Views: 1297
Jacques, When cleaning the thread you deleted my last message into which I was making my question more accurate. I know what tangs are and how to attach them ; I do not have any concern or worry about that. I saw the 3267 mm on the plan. I'm just surprised by this dimension and I 'm just looking for...
- Sat Jan 31, 2004 9:36 am
- Forum: Small Boats
- Topic: C12: position of shrouds tangs on mast ?
- Replies: 4
- Views: 1297
C12: position of shrouds tangs on mast ?
Hi all, C12 almost completed, still paint and varnish to do ... I'll post some pictures as soon as I will have splashed her, probably with some comments on changes I did (flottation reserves, tunable mast position, vang, pivoting rudder, "plat-bords", but it will be easier to describe with...
- Tue Apr 29, 2003 5:15 pm
- Forum: Small Boats
- Topic: Self bailing C12
- Replies: 1
- Views: 825
Self bailing C12
Hi, Building the C12. So far, so good : hull assembled, fillet glassed, centerboard case in place. Building as per plan apart that I will replace the laminated rubrail by one made of plain padouk 20x40 mm and also add a small plywood deck 8 cm (+- 3'') wide all around the boat. The objective is to s...
- Mon Feb 24, 2003 4:14 pm
- Forum: Small Boats
- Topic: C12 bottom panel measurements
- Replies: 0
- Views: 820
C12 bottom panel measurements
Jacques,<BR><BR>I know that the topic of the bottom panel measurement from plywood sheet edge vs keel curve has been already discussed in a previous thread (http://www.bateau2.com/modules.php?op=modload&name=Forums&file=viewtopic&topic=721&forum=1) of this forum, but I do not feel co...