Search found 291 matches

by AD16 The Opportunist
Wed May 06, 2015 7:06 am
Forum: Builder's Sail Boats
Topic: AD 14 KIELGE
Replies: 1164
Views: 169412

Re: AD 14 KIELGE

The 4200 mentionned from Ks8 is a marine sealant from 3M. As alternative, here in Europe you can find a range of similar products under the names Pantera, Sika and others... do a search in the net, there are a lot of marine shops selling those products, or try in the nearest marine shop ;)
by AD16 The Opportunist
Tue Jul 09, 2013 4:25 am
Forum: Builder's Sail Boats
Topic: AD16 Karenina
Replies: 195
Views: 93401

Re: AD16 Karenina

Looks like the seat frame (D) is too high...
by AD16 The Opportunist
Tue Apr 16, 2013 2:44 pm
Forum: Finished Boats
Topic: GF16 rebuild with center console 25Hp Suzuki
Replies: 26
Views: 24429

Re: GF16 rebuild with center console 25Hp Suzuki

Congratulations, Bernd! 8) 8) 8) Nice job!
by AD16 The Opportunist
Thu Mar 14, 2013 12:58 pm
Forum: Finished Boats
Topic: PY12 wintertime build (nov.2012/march2013)
Replies: 11
Views: 4764

Re: PY12 wintertime build

well, thanks again Larry, here some details about the construction: hull,side and deck panels are from 4mm okume plywood. Front frame, seat frame and sole are 6mm marine ply (okume). Aft frame was cut off from 10mm okume ply and modified leaving 75mm all around .The plan was calling for a sealed com...
by AD16 The Opportunist
Thu Mar 14, 2013 9:25 am
Forum: Finished Boats
Topic: PY12 wintertime build (nov.2012/march2013)
Replies: 11
Views: 4764

Re: PY12 wintertime build

Thank you very much Larry, i forgot how to post the pics :oops:
by AD16 The Opportunist
Wed Mar 13, 2013 4:54 pm
Forum: Finished Boats
Topic: PY12 wintertime build (nov.2012/march2013)
Replies: 11
Views: 4764

PY12 wintertime build (nov.2012/march2013)

Here some pics of my finished Plyak12.... a slow build due to low temperature and short days, but ready to float! 8) http://gallery.bateau2.com/thumbnails.php?album=1575
by AD16 The Opportunist
Wed Mar 13, 2013 2:17 pm
Forum: Builder's Small Boats
Topic: Aripeka Angler's PY12 Build
Replies: 149
Views: 26600

Re: Aripeka Angler's PY12 Build

Well boys, here's the link to my gallery and my just finished PY12! 8) http://gallery.bateau2.com/thumbnails.php?album=1575
by AD16 The Opportunist
Fri Nov 16, 2012 12:02 pm
Forum: Small Boats
Topic: PLYAK12 wrong dimension
Replies: 4
Views: 1129

Re: PLYAK12 wrong dimension

:D :D :D well, shorten the sole isn't a trouble, (already planned as solution) :wink: it was more for you, in order to correct the future prints! Thank you very much for the quick answer!
by AD16 The Opportunist
Fri Nov 16, 2012 11:26 am
Forum: Small Boats
Topic: PLYAK12 wrong dimension
Replies: 4
Views: 1129

PLYAK12 wrong dimension

Hello Jacques, I've found another wrong dimension on the plans... I have already cut the cockpit sole, i was glueing the cockpit coaming on the deck panels and i found an incongruence: the given distance between center frame and end frame is 406mm from center line for the center frame and 1029mm for...
by AD16 The Opportunist
Thu Nov 15, 2012 8:27 am
Forum: Small Boats
Topic: PY12 frames location
Replies: 24
Views: 2929

Re: PY12 frames location

I'll be ready to stitch in a few days! I'll give you then that measurement.... WARNING: you need to redraw and cut the BOTTOM of side panels, NOT THE TOP!!!!!! :wink: