GF12 (side console)

To help other builders, please list the boat you are building in the Thread Subject -- and to conserve space, please limit your posting to one thread per boat.

Please feel free to use the gallery to display multiple images of your progress.
dscott
New Poster
New Poster
Posts: 9
Joined: Tue Feb 10, 2009 9:43 pm
Location: orlando

GF12 (side console)

Post by dscott »

I bought the hull from SmilinMatt (his GF12 "Floundering Around) and spent around a year puttering around with it - I had written the board about removing a section of the center seat but was advised not to by Jacques - I am not sure he would approve of all the mods I have made but here it is finished.
----------------------------------------------------
Once I got the hull home I sanded, re-epoxied and then painted it in a two part Matthews paint and finished it off with two coats of clear coat. Then I mounted a side console to the middle seat and ran PVC pipes to the rear of the boat to carry the electrical and rigging.
Image
----------------------------------------------------
Moved the battery forward under the front deck....
Image
--------------------------------------------------
Moved the Gas under the center seat to better balance the load....
Image
------------------------------------------------------
Installed a bait bucket and rod holder in the center seat....
Image
-----------------------------------------------------
Cut the cooler into the rear deck and blocked it from below. ...
Image
-----------------------------------------------------
Built a manual lift for the motor (15 hp) and mounted it to the boat ...
Image
--------------------------------------
And - here it is complete. It has been a great boat - I have really enjoyed fishing it.

Image

Image

Image

Image
...

...

...

...

Cheers,

Don

User avatar
sitandfish
Very Active Poster
Very Active Poster
Posts: 1352
Joined: Tue Jul 28, 2009 12:55 am
Location: SC

Re: GF12 (side console)

Post by sitandfish »

Hey, Don. I had seen your boat on another site and mentioned it on this site a short while back. Hope you don't mind? I thought it was cool to see her come back to life. :wink:

Here is a link to the other thread. http://forums.bateau2.com/viewtopic.php?f=6&t=23578
Image

dscott
New Poster
New Poster
Posts: 9
Joined: Tue Feb 10, 2009 9:43 pm
Location: orlando

Re: GF12 (side console)

Post by dscott »

I don't mind at all - glad that someone appreciates the time and effort that went into bringing her back to life for another round! :D

Don

User avatar
wegcagle
* Bateau Builder *
* Bateau Builder *
Posts: 2536
Joined: Wed Jun 18, 2008 7:08 am
Location: Augusta, GA

Re: GF12 (side console)

Post by wegcagle »

Great job on the boat Don it looks great. I'm sure you will get plenty of good hours out of her.

Will
Image

GV15, D4 done! Dreaming about the next one

User avatar
Cracker Larry
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 22491
Joined: Fri Mar 11, 2005 3:39 pm
Location: Savannah, GA

Re: GF12 (side console)

Post by Cracker Larry »

That's sweet. That is the biggest little boat ever made.
glad that someone appreciates the time and effort that went into bringing her back to life for another round! :D
I appreciate it, I've built 2 of them and appreciate every stroke of sandpaper :wink:
Completed GF12 X 2, GF16, OD18, FS18, GF5, GF18, CL6
"Ships are the nearest things to dreams that hands have ever made." -Robert N. Rose

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests