EMC clear coat and real wood

Cracker Larry · Post by **Cracker Larry** » Tue Jan 20, 2015 2:07 pm

Looks great! I've got a front door that I need to do the same thing to.

bigtalljv · Post by **bigtalljv** » Tue Jan 20, 2015 2:22 pm

i have two sets of french doors and and one solid front door left to do. I also have to build a replacement for another entrance.

Jason

bigtalljv · Post by **bigtalljv** » Thu Jan 29, 2015 12:42 am

ok, i started on the next set. I spent 6 or 7 hours sanding and got the first coat of epoxy on today. You can see in the last picture that it went on a little heavier in places than I would have liked. It soaked in completely some and bubbled in other and was just lumpy elsewhere. I will give it a good sanding tomorrow and get the second coat on then several coats of EMC clear after that.

Bleached:

Sanding:

First coat epoxy:

ks8 · Post by **ks8** » Thu Jan 29, 2015 12:04 pm

Wow, nice!

bigtalljv · Post by **bigtalljv** » Wed Mar 11, 2015 8:36 pm

Now the front door. I am quite pleased with the results. I hope this EMC lasts a long time. I really want to forget I had to do this.

Before

After

tech_support · Post by **tech_support** » Thu Mar 12, 2015 9:39 am

nice!

I hope this EMC lasts a long time.

well, its the same stuff that goes on the hulls of boats and also aircraft......so Im betting you have time to forget the pain

Boat Builder Central

Builder Forum

EMC clear coat and real wood

Re: EMC clear coat and real wood

Re: EMC clear coat and real wood

Re: EMC clear coat and real wood

Re: EMC clear coat and real wood

Re: EMC clear coat and real wood

Re: EMC clear coat and real wood

Re: EMC clear coat and real wood

Who is online

Login • Register