GV11 with a 15 HP motor.

Ask questions before buying our plans or request a new design. Anybody can post here
User avatar
Evan_Gatehouse
Very Active Poster
Very Active Poster
Posts: 3210
Joined: Tue Aug 27, 2002 1:00 am
Location: Vancouver, BC, Canada

GV11 with a 15 HP motor.

Post by Evan_Gatehouse »


bula from fiji!
is it possible to run a 15 hp motor on the garvey 11? would it need transom
to be beefed up?
i have a 15 hp mercury i just bought and would like to use it.

Regards

Doug Cusick
Lautoka Fiji islands

Hi,

Yes totally possible. No need to beef up the transom. I ran a GV10 with a 15 for years. The GV11 is just a slightly bigger version.
But it is important to cover the bottom of the hull (inside and outside) with the optional 1 layer of 400 gm (12 oz) biaxial cloth specified.

I imagine in Fiji it may be impossible to get biaxial. In that case 2 layers of 9 oz woven cloth can be used instead.

p.s. we have a good friend in Fiji that occasionally drops in to Lautoka. She lives on Naviti in the Yasawas normally.
designer: FB11/GV10,11,13/ HMD18/
SK17,MM21/MT24

Who is online

Users browsing this forum: No registered users and 1 guest