antifouling over yacht primer

See our FAQ and tutorials before posting.
Post Reply
THE WALRUS
Frequent Poster
Frequent Poster
Posts: 112
Joined: Sat Aug 15, 2009 8:53 am
Location: Halifax Nova Scotia

antifouling over yacht primer

Post by THE WALRUS »

I would like to know if Interlux Fiberglass Bottomkote can be applied directly over System Three Yacht Primer. Thanks

The Walrus
Top
fallguy1000
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 10205
Joined: Tue Jan 12, 2010 12:25 am

Re: antifouling over yacht primer

Post by fallguy1000 »

THE WALRUS wrote: ↑Thu Jul 13, 2023 8:28 pm I would like to know if Interlux Fiberglass Bottomkote can be applied directly over System Three Yacht Primer. Thanks

The Walrus
Probably fine, but you normally apply the antifouling within a window of time after primer.
My boat build is here -------->

viewtopic.php?f=12&t=62495
Top
Reid
Site Admin
Site Admin
Posts: 722
Joined: Wed Aug 03, 2016 12:34 pm
Location: Fort Pierce, FL

Re: antifouling over yacht primer

Post by Reid »

The System Three Yacht Primer (now called Pennant Primer) is an epoxy based primer. Should not be an issue to use as a base for your Bottomkote. I would go to the Interlux website and pull the TDS for the Bottomkote just to be sure.
-Reid
Someone asked me, if I were stranded on a desert island what book would I bring... "How to Build a Boat."
- Steven Wright
Top
Post Reply

Return to “Resins, Fiberglass and Paint”

Who is online

Users browsing this forum: No registered users and 1 guest