1988 Shoalwater 176 Rebuild

Questions about boat repairs with our resins and fiberglass: hull patches, transoms and stringers, foam, rot etc.
fallguy1000
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 10195
Joined: Tue Jan 12, 2010 12:25 am

Re: 1988 Shoalwater 176 Rebuild

Post by fallguy1000 »

fallguy1000 wrote: Sat Feb 10, 2024 5:40 pm The only way to cut that is to do major reconstruction; so leave it.

But it is a design flaw in the hull.

If you ever experience prop blowout at top speed or inability to get to wot; you'll know the reason..
If you experience blowout; you might be able to deal with it by inching down; so a hydraulic jackplate that'll go minus would be a no hull correction solution to the potential problem that may not exist at all!
My boat build is here -------->

viewtopic.php?f=12&t=62495

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest