I've finished all outside laminations. Pictures have been posted, link below.
GV 17 Album
Now on to fairing and then painting. I will be fitting the rubrail and sprayrail after fairing and prior to painting.
Gary
GV17 in Brisbane
-
- Frequent Poster
- Posts: 30
- Joined: Tue Sep 13, 2005 3:55 am
- Location: Brisbane, Australia
-
- Very Active Poster
- Posts: 1633
- Joined: Fri May 16, 2003 1:00 am
- Location: MOBILE, AL
Gary,
The boat is looking great!
The boat is looking great!
Last edited by FLYonWALL9 on Sat Aug 19, 2006 11:34 am, edited 1 time in total.
-
- Frequent Poster
- Posts: 30
- Joined: Tue Sep 13, 2005 3:55 am
- Location: Brisbane, Australia
-
- Frequent Poster
- Posts: 30
- Joined: Tue Sep 13, 2005 3:55 am
- Location: Brisbane, Australia
-
- Frequent Poster
- Posts: 30
- Joined: Tue Sep 13, 2005 3:55 am
- Location: Brisbane, Australia
I finished the exterior painting today. Pictures have been posted, link below.
GV17 Album
I'm not real happy with the finish, a couple of runs, and a bit of bleeding through the masking tape , but such is life. I guess I would need to pay a tradesman if I wanted a better finish.
Hopefully I will be able to round up a few mates on the weekend and do the roll over. A promise of a few beers should see it happen.
GV17 Album
I'm not real happy with the finish, a couple of runs, and a bit of bleeding through the masking tape , but such is life. I guess I would need to pay a tradesman if I wanted a better finish.
Hopefully I will be able to round up a few mates on the weekend and do the roll over. A promise of a few beers should see it happen.
Gary Harms
GV11+ finished. Building a GV 17.
GV11+ finished. Building a GV 17.
- tech_support
- Very Active Poster
- Posts: 12318
- Joined: Wed Dec 31, 1969 7:00 pm
- Location: Vero Beach, FL
- Contact:
Who is online
Users browsing this forum: Ahrefs [Bot] and 6 guests