We are stocking a new 3.25 oz. woven cloth. This glass cloth goes complete clear and is stronger than regular 4 oz cloth. We tested this cloth on a piece of Okoume plywood. We staggered the cloth so that there was 2 layers, then one layer, then only bare wood. After the epoxy cured, you cannot see any difference between the three spots.
Here is the link and a picture of the Okoume…..
http://www.boatbuildercentral.com/prodd ... th_3.25_50
One trick to this glass is to use a spreader to work out the tiny air bubbles. the weave is super fine and it wants to trap air. Use this with a thin epoxy (Silvertip or Marinepoxy) for best "clear" results
New super clear finish cloth
- tech_support
- Very Active Poster
- Posts: 12318
- Joined: Wed Dec 31, 1969 7:00 pm
- Location: Vero Beach, FL
- Contact:
Who is online
Users browsing this forum: No registered users and 1 guest