Page 1 of 22

GF16 Pictures Bernd

Posted: Wed Apr 23, 2008 4:25 pm
by bernd1
Hi @ all,

here are my first pictures of my GF16.

http://gallery.bateau2.com/thumbnails.php?album=804

I hope to glue and glass soon.

Bye
Bernd

Posted: Wed Apr 23, 2008 6:06 pm
by AD16 The Opportunist
:D ! Time to mix some 'poxy...

Posted: Wed Apr 23, 2008 6:23 pm
by comfyoldshoe
Bernd,
Didn't you start out to build an FS17? Why did you change your mind?
The boat looks great so far!

Mike

Posted: Wed Apr 23, 2008 8:12 pm
by topwater
Bernd looking real good :!:
You see it wasnt as hard as you thought :)

Posted: Thu Apr 24, 2008 6:33 am
by bernd1
comfyoldshoe wrote:Bernd,
Didn't you start out to build an FS17? Why did you change your mind?
The boat looks great so far!

Mike

Mike you are right - first I wanted to build a FS17 then decided to build a easier boat to get practise - the GF16 was my choice.
I also thought about the FS14 as my first building - but the GF6 is it at least.

But don't be sad the plywood for the FS17 is stocked in my friends wood shed.

I ordered 10 sheets of 10mm 10sheets of 6mm and 3 sheets of 12mm.
At the moment 3 sheets of 12mm and 4 sheets of 6mm are used for the GF16.


Believe, once a day you will hear from my FS17 - but not yet.

Bye
Bernd

Posted: Thu Apr 24, 2008 3:20 pm
by mecreature
that GF16 is a sweet boat. Looks like you are well under way.

Posted: Thu Apr 24, 2008 3:41 pm
by tech_support
looks good :)

I think you have plenty of experience for any one of our designs

Posted: Thu Apr 24, 2008 4:07 pm
by bernd1
...thanks for your motivating .....at the moment I'am praying for a higher outside temperature - glueing,glueing, glassing,glassing are now my prefered words......

:D :D :D :D :D :D :D :D :D :D :lol: :lol: :lol: :lol: :lol: :lol: :lol:

Bye
Bernd

Posted: Thu Apr 24, 2008 11:05 pm
by robbiro
Bernd,
I am going to have to get busy, or you and Larry will both beat me to getting the new boats in the water. You are doing a great job and just enjoy the experience of building and hanging out with this great group of builders. I have never failed to get a good answer to a question and to get a pat on the back when I needed it.

Keep on Buildin'

Robbie

Posted: Fri Apr 25, 2008 6:48 am
by bernd1
robbiro wrote:Bernd,
I am going to have to get busy, or you and Larry will both beat me to getting the new boats in the water. You are doing a great job and just enjoy the experience of building and hanging out with this great group of builders. I have never failed to get a good answer to a question and to get a pat on the back when I needed it.

Keep on Buildin'

Robbie
...I know, the crew here is really good - the best board I ever visited in the Internet.
For me the best motivation to keep on building - but one step after another step, I don't like to work in hurry....only with a normal speed.

Bye
Bernd