Page 1 of 20
FL26 build in Friesland
Posted: Sat Apr 26, 2008 5:02 pm
by Jaap
After a little delay in the start due to the cold, I made a begin with our FL26 a few weeks ago. The jig is ready, all the molds for the hull are sawn including the mold for the transom. The bottom parts are glued together and shaped with the jigsaw and the same with the sidepanels. I've also ordered a 10Kw electro engine; this is our try to see if elektro boating can be enough satisfying. The plans so far are great, easy to read and understand. Its my first boat with this method, but I did (and do)quite a lot of furniture making and have years of experience with fiberglass.
On monday we leave for a short holiday to Valencia. Our neighbours have a house there, he is a member of the Oracle Americas Cup team. See if we can do some sailing there and enjoy the spanish seafood and wine. If I can make some interesting pictures there, i'll post them here.
Here are the first pictures
http://gallery.bateau2.com/index.php?cat=18965
cu, jaap
Posted: Sun Apr 27, 2008 11:39 am
by Spokaloo
Im horribly excited to see one of these exist. This is a beautiful boat!
To use an American expression, that shop is going to be tighter than a frog's ass when the boat becomes assembled.
E
Posted: Sun Apr 27, 2008 8:03 pm
by Daniel Huckleberry
I'm really excited to watch this one come together, too! My wife and I are discussing our needs in our next boat and this one tops the list.
Good luck and enjoy!
Huck
Posted: Mon Apr 28, 2008 8:37 pm
by dborecky
Daniel Huckleberry wrote:I'm really excited to watch this one come together, too! My wife and I are discussing our needs in our next boat and this one tops the list.
Good luck and enjoy!
Huck
Now we are talking about fairing.
I would love to see the great job you would do with that great boat.
You could even cross to the Bimini in that one with the right conditions.
Posted: Fri May 02, 2008 5:49 pm
by WobblyLegs
Mmmm, there's a certain Kiwi in SW France that I'm sure will be watching this build with interest!
And me!
Enjoy it!
Tim.
a boatbuilder wrestling and progress
Posted: Thu May 29, 2008 1:37 pm
by Jaap
Posted: Thu May 29, 2008 3:56 pm
by ks8
Will it fit through those doors?
Thanks for helping us watch an FL26 come together.
Posted: Thu May 29, 2008 4:00 pm
by jacquesmm
Jaap, if the plans are confusing, let me know.
I can show the dimensions differently.
I may go to the Hiswa this year. It's close and I may ask to visit you.
Posted: Thu May 29, 2008 4:35 pm
by Jaap
Hello Jacques (and everybody else of course),
You're very welcome! We have a guesthouse and I make good pasta or noodles. The Hiswa was in februari and I think you mean the Mets? The plans are not confusing, it is more a matter of concentration. The last few days, I have put all the hull parts together, and already sanded one side after glueing. All parts fit together quite fine. Very helpfull to get a good fairing of the slits in the flairing of the bow are strips of plywood screwed on the slits every 40 cm. I filled the spaces between the slits with glue and it looks that I need a minimum of filler to get it in shape! The tip came from my neighbour Thijs de Jong, an experienced boatbuilder and a good friend.
People around here (it is one of finest watersport area's) love the lines and looks of the boat.
@KS8, it's a double door, no problem!
best regards,
jaap
Posted: Thu May 29, 2008 8:57 pm
by Spokaloo
Jaap, thats beautiful plywood, my compliments to your supplier.
So I am going to be flying to Croatia in September, can we have a bowl of pasta at your place on the way?
E