Page 1 of 15

Aripeka Angler's PY12 Build

Posted: Thu Aug 23, 2012 7:47 pm
by Aripeka Angler
Well, the boat building virus has flared up again :wink: A few weeks ago, I decided to not start this build thread until I was actually working on the kayak. I started making sawdust this afternoon 8) Not much to see, but a start anyhow...

Image

Image

I think this might be one of the first PY12 builds. I will stick to the plan as drawn and hopefully I won't mess up too bad...

Re: Aripeka Angler's PY12 Build

Posted: Thu Aug 23, 2012 7:52 pm
by peter-curacao
Nice!! Although your cooking looks/tastes great, I like seeing you building stuff 8)

Re: Aripeka Angler's PY12 Build

Posted: Thu Aug 23, 2012 8:04 pm
by peter-curacao
I know you wanna stick to the plans, still I wanna show you this Miragedrive , don't know where you gonna use the kayak and if it is an option for you, just wanted to show you since its also a fishing kayak.

Also I don't know if its working as advertised, just got the link from a friend of my who's also looking into fishing kayaks/subs, and also is a forum member here for about a week or so, his nick is misterfly.

Edit: changed name for drive to correct one

Re: Aripeka Angler's PY12 Build

Posted: Thu Aug 23, 2012 9:38 pm
by Aripeka Angler
peter-curacao wrote:I know you wanna stick to the plans, still I wanna show you this Megadrive , don't know where you gonna use the kayak and if it is an option for you, just wanted to show you since its also a fishing kayak.

Also I don't know if its working as advertised, just got the link from a friend of my who's also looking into fishing kayaks/subs, and also is a forum member here for about a week or so, his nick is misterfly.
Thanks for the welcome Peter :D You have got me interested in the megadrive 8) I will do some reading on that system...

Re: Aripeka Angler's PY12 Build

Posted: Thu Aug 23, 2012 10:47 pm
by cali123
Good to see you building the plyak. There are a bunch of us that are interested in building one. 8)

Re: Aripeka Angler's PY12 Build

Posted: Fri Aug 24, 2012 7:35 am
by misterfly_nl
I will follow this build every step, because I like to build my fishing cano too.

Re: Aripeka Angler's PY12 Build

Posted: Fri Aug 24, 2012 7:47 am
by Cracker Larry
Good start 8) Did you cut that out with your CNC machine, or do it the old fashion way?

That's a really nice looking little kayak. I might have to build one after I get the FS18 finished.

Are you making hurricane preps yet? Looks like it's going to be very wet there in a couple of days. Let me know if you need any help with the boats or filling sandbags.

Re: Aripeka Angler's PY12 Build

Posted: Fri Aug 24, 2012 9:23 am
by jacquesmm
Soon, probably within 3 days, we will post building notes for the SUP14. While experimenting with the assembly, we discovered a few tricks like gluing the sheer clamp ( I may call it inwale on some plans) to the side panel before assembling the hull.

I also though of more options like some stiffeners, deck beam style, for the hatches.
And a side deck brace in case somebody wants to mount accessories on the side of the cockpit or just for better support of the side deck when getting in and out of the boat. I may post a "building notes update" as soon as I draw those options.

Re: Aripeka Angler's PY12 Build

Posted: Fri Aug 24, 2012 10:22 am
by Dougster
I'm happy to see you start this thread Richard, especially since I have a secret interest in building this one once my endless LB22 build is finished :roll: (I'm sitting here waiting for the induction time on a little Sterling mix for the cockpit right now). I have given some thought to the Mirage drive and read up on it a bit. There's a Hobie rental place nearby so I think I'll give it a try once the weather cools. Looks like you're doing the first one!

Watching on the sidelines Dougster

Re: Aripeka Angler's PY12 Build

Posted: Fri Aug 24, 2012 10:51 am
by hockey52
Gonna be watching this build! :)