Penny HMD19
Re: Penny HMD19
She is a real beauty! Hope you get her in the water sooner than you'd hoped.
-
- * Bateau Builder - Expert *
- Posts: 882
- Joined: Mon Feb 04, 2013 9:06 am
- Location: Ottawa, ON, Canada
Re: Penny HMD19
Hi Bogieman...thank you ! Bathroom reno just done and kitchen starting...hmmm At least do a few things to move her along
I can't believe it has been seven years already.
Marc
I can't believe it has been seven years already.
Marc
Re: Penny HMD19
I agree, a real beauty!!! Jeff
-
- Frequent Poster
- Posts: 55
- Joined: Mon Jul 16, 2018 2:12 am
- Location: The Netherlands
Re: Penny HMD19
Hi Marc,
I added your new pictures to my HMD collection. A view could be used for a postcard! So nice!!
I hope summer starts early for you so you can build on!
With your 'new' family you got a pair of extra hands to help, so maybe the launch will be earlier
Daniel
I added your new pictures to my HMD collection. A view could be used for a postcard! So nice!!
I hope summer starts early for you so you can build on!
With your 'new' family you got a pair of extra hands to help, so maybe the launch will be earlier
Daniel
-
- * Bateau Builder - Expert *
- Posts: 882
- Joined: Mon Feb 04, 2013 9:06 am
- Location: Ottawa, ON, Canada
Re: Penny HMD19
Hey Daniel !!
Still snacking on the cookies . I am anticipating seeing photos of your model and the real thing later on. The younger one is too young to help and the other has just joined the Navy...my wife did help me with the electrical and is up to it again when we have a chance. But cruising is what we fantasize about. It will be a blast.
Hope things are good with you my friend. Be good and get cracking
Marc
Still snacking on the cookies . I am anticipating seeing photos of your model and the real thing later on. The younger one is too young to help and the other has just joined the Navy...my wife did help me with the electrical and is up to it again when we have a chance. But cruising is what we fantasize about. It will be a blast.
Hope things are good with you my friend. Be good and get cracking
Marc
-
- * Bateau Builder - Expert *
- Posts: 882
- Joined: Mon Feb 04, 2013 9:06 am
- Location: Ottawa, ON, Canada
Re: Penny HMD19
Hi all,
Hope everything is ok with you all. End of another year with outfitting. I did what I could with all that is going on.
Marc
Hope everything is ok with you all. End of another year with outfitting. I did what I could with all that is going on.
Marc
-
- * Bateau Builder - Expert *
- Posts: 8921
- Joined: Tue Aug 02, 2011 4:23 am
- Location: Kasilof, Alaska
Re: Penny HMD19
Looks like you are really close to launch time
-
- * Bateau Builder *
- Posts: 1202
- Joined: Sat Mar 16, 2013 10:25 am
- Location: Wels,Austria,Europe
Re: Penny HMD19
It looks beautiful all that is missing for launching are the windows. Keep going and start Your cruising time next spring.
Re: Penny HMD19
Nice progress and very neat wiring!!!! Jeff
-
- * Bateau Builder - Expert *
- Posts: 882
- Joined: Mon Feb 04, 2013 9:06 am
- Location: Ottawa, ON, Canada
Re: Penny HMD19
Hey guys, yes the windows and cushions only left to go. A few small details to do still. The seats are full swivel and front/back without interference. It really needed a good scrub inside the cabin tho.
So what I did; shaped and installed the aluminum flat bar rub rails, installed the Merc remore controller, installed compass, tidied-up and finished the electrical wiring, ran all the controls and cables, added white plastic caps on all visible nuts, added blue rope detail around portholes and inside the door, assembled and installed the seats, added epoxy filets around all the cleats in cabin (crud accummulated in there before) and repainted white, did work on the galley area...odds and ends.
Marc
So what I did; shaped and installed the aluminum flat bar rub rails, installed the Merc remore controller, installed compass, tidied-up and finished the electrical wiring, ran all the controls and cables, added white plastic caps on all visible nuts, added blue rope detail around portholes and inside the door, assembled and installed the seats, added epoxy filets around all the cleats in cabin (crud accummulated in there before) and repainted white, did work on the galley area...odds and ends.
Marc
Who is online
Users browsing this forum: No registered users and 8 guests