The forum upgrade is complete. It was very uneventful. Please post issues in this thread.

Due to a high level of "bad actor" traffic on the community site Jaysen is implementing a forced verification to confirm that you are a human. This is a PITA and he hates it too. The 3.2 seconds it takes for the one time you have to do it every couple hours is much preferable to the hours we are losing to morons clogging the CPU on the servers. Jaysen is still looking to solve this a bit less intrusively and without cost to BBC. Hopefully the magic solution will appear out of thin air soon. Jaysen is already annoyed.

EMC dry sailed

technical support and information on EMC topcoats and coatings
Jknight611
New Poster
New Poster
Posts: 2
Joined: Fri Jun 20, 2014 5:42 pm
Location: South Coast USA

EMC dry sailed

Post by Jknight611 »

Hi all, wondering, the material sheet said the paint wasn't for underwater coatings, on a "normally" dry sailed boat that would see at most 3 weeks constant immersion once a year has anyone experienced any blistering or other ill effects? We generally like to stay on the move on the summer trip, but the boat will most likely live on the trailer too much.

Thanks for sharing your knowledge
Jay



User avatar
tech_support
Very Active Poster
Very Active Poster
Posts: 12318
Joined: Wed Dec 31, 1969 7:00 pm
Location: Vero Beach, FL
Contact:

Re: EMC dry sailed

Post by tech_support »

Hi Jay,

All the paint companies are going to say the same thing on their tech data sheet in terms of the paint's application below the water line.

It takes a very long time for the paint (two part polyurethane topcoats) to become soft enough where it is damaged. It could be a couple weeks, it could be a couple months, but you wont get an answer (for liability reasons) from the manufacturer, other than "not for use below the waterline"
at most 3 weeks
I will say that if it was my boat, i would not be concerned

Jknight611
New Poster
New Poster
Posts: 2
Joined: Fri Jun 20, 2014 5:42 pm
Location: South Coast USA

Re: EMC dry sailed

Post by Jknight611 »

Shine, thanks, I suspect I will use his paint. Our goal is for our yet to be completed Core Sound to kinda match our Pacific Seacraft Orion in color.

Thanks for the help!
Jay

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests