Flyer

peter-curacao · Post by **peter-curacao** » Tue Oct 04, 2016 9:51 pm

jacquesmm wrote:Is that the question you want me to answer Peter?
I 100% agree with Evan, it's the depth that matters.

Sorry for the delayed reply: I was out of town, on a boat with no internet access.

yes will 80 mm enough? and can motor I've shown be used or do I need more HP?

Post by **jacquesmm** » Mon Oct 10, 2016 11:30 am

And now the hurricane . . . yes, 80 mm is fine.

Did you get that engine?

peter-curacao · Post by **peter-curacao** » Mon Oct 10, 2016 11:43 am

jacquesmm wrote:And now the hurricane . . . yes, 80 mm is fine.

Did you get that engine?

No it wasn't enough HP

peter-curacao · Post by **peter-curacao** » Wed Oct 12, 2016 12:47 pm

peter-curacao wrote:
jacquesmm wrote:And now the hurricane . . . yes, 80 mm is fine.

Did you get that engine?
No it wasn't enough HP

I liked the idea of using a rotex engine from salvaged PWC, but since I use a straight shaft prop and not the jet what kind of gearbox should I put behind that to achieve a reverse ?

Post by **jacquesmm** » Wed Oct 12, 2016 1:28 pm

Find out what the designer specified and it will give you the rpm at the shaft. Work from there BUT those Rotax turn at high rpm and I don't think you will find a gear box to reduce it enough.

peter-curacao · Post by **peter-curacao** » Wed Oct 12, 2016 5:28 pm

jacquesmm wrote:Find out what the designer specified and it will give you the rpm at the shaft. Work from there BUT those Rotax turn at high rpm and I don't think you will find a gear box to reduce it enough.

So it's not that easy? motor is gonna give me a headache I think, was nesting the frames today, did the best I could, still I used way more wood as I thought I would

just enough or just not enough material left for the straight stringers, we will see.
Since it's possible that this is becoming a build thread, and that it is not a Bateau build, maybe the webmaster can move it to the appropriate topic forum, or not?

Post by **jacquesmm** » Wed Oct 12, 2016 6:42 pm

Feel free to start a building thread. I may design a kit for that boat next year.

BarraMan · Post by **BarraMan** » Thu Oct 13, 2016 9:14 am

Xxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx

How do you delete this?

Eric1 · Post by **Eric1** » Thu Oct 13, 2016 4:25 pm

jacquesmm wrote:Feel free to start a building thread. I may design a kit for that boat next year.

I believe it would sell for you. I think these old designs are awesome!

I found this on you tube.

https://youtu.be/yM7IaCC7EB4

peter-curacao · Post by **peter-curacao** » Sat Oct 15, 2016 10:35 am

Jacques what are you thinking for the stringers? I was thinking also single 8 mm or maybe 2x 6mm laminated? and how many stringers ? 2 , 3 or 4?

Boat Builder Central

Builder Forum

Flyer

Re: Flyer

Re: Flyer

Re: Flyer

Re: Flyer

Re: Flyer

Re: Flyer

Re: Flyer

Re: Flyer

Re: Flyer

Re: Flyer

Who is online

Login • Register