The forum upgrade is complete. It was very uneventful. Please post issues in this thread.
Due to a high level of "bad actor" traffic on the community site Jaysen is implementing a forced verification to confirm that you are a human. This is a PITA and he hates it too. The 3.2 seconds it takes for the one time you have to do it every couple hours is much preferable to the hours we are losing to morons clogging the CPU on the servers. Jaysen is still looking to solve this a bit less intrusively and without cost to BBC. Hopefully the magic solution will appear out of thin air soon. Jaysen is already annoyed.
Due to a high level of "bad actor" traffic on the community site Jaysen is implementing a forced verification to confirm that you are a human. This is a PITA and he hates it too. The 3.2 seconds it takes for the one time you have to do it every couple hours is much preferable to the hours we are losing to morons clogging the CPU on the servers. Jaysen is still looking to solve this a bit less intrusively and without cost to BBC. Hopefully the magic solution will appear out of thin air soon. Jaysen is already annoyed.
bottom coat
Re: bottom coat
That is the first coat, the primer coat. Do you mena bottom paint? Any paint.
For a boat that lives on a trailer, many here use epoxy with graphite for the bottom.
For a boat that lives on a trailer, many here use epoxy with graphite for the bottom.
Jacques Mertens - Designer
http://boatbuildercentral.com
http://boatbuildercentral.com
computer cut-out
Does the man still cut the plywood to specs, for your company? In upstate NY.
I picked up the gt cruiser23 there a few years ago. Going to build the Maia 24 in the near future
I picked up the gt cruiser23 there a few years ago. Going to build the Maia 24 in the near future
Re: bottom coat
Are you talking about Eric in upstate NY? No, he is not in the boat building business anymore and we cut the kits here, under the supervision of the designer 
.
Email me when you are ready for your big boat project.
.Email me when you are ready for your big boat project.
Jacques Mertens - Designer
http://boatbuildercentral.com
http://boatbuildercentral.com
Who is online
Users browsing this forum: No registered users and 0 guests