20 foot seacraft deck

Questions about boat repairs with our resins and fiberglass: hull patches, transoms and stringers, foam, rot etc.
lelandtampa
Frequent Poster
Frequent Poster
Posts: 111
Joined: Wed Jun 22, 2005 5:44 pm
Location: tampa

Re: 20 foot seacraft deck

Post by lelandtampa »

Edit

lelandtampa
Frequent Poster
Frequent Poster
Posts: 111
Joined: Wed Jun 22, 2005 5:44 pm
Location: tampa

Re: 20 foot seacraft deck

Post by lelandtampa »

finally learned how to post pics. yes i am an idiot.

Image

insulated Fishbox lid in front casting deck.

Image

reusing the old hatch doors with a little CNC logo touch.

Image

leaning post 31" tall x 24" wide x 15 deep. Will have a small tackle center flush mounted in it. and mounts over the fuel tank inspection port. 1/2 BALTIC BIRCH because I had it on hand and got covid bored. I'm going to double tape all seams with 12 oz biax in and out and cover outside with 10 oz cloth.
Image

tackle center cut out
Last edited by lelandtampa on Wed Apr 22, 2020 12:40 pm, edited 1 time in total.

Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 8921
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: 20 foot seacraft deck

Post by Fuzz »

Well I hate to say this but I don't see the pictures :cry:

lelandtampa
Frequent Poster
Frequent Poster
Posts: 111
Joined: Wed Jun 22, 2005 5:44 pm
Location: tampa

Re: 20 foot seacraft deck

Post by lelandtampa »

Crap

Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 8921
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: 20 foot seacraft deck

Post by Fuzz »

Spoke too soon I guess because they are there now :D
The Seacraft logo is neat. And the leaning post is going to be nice.

Jeff
Site Admin
Site Admin
Posts: 8436
Joined: Fri Apr 29, 2016 12:17 pm
Location: Vero Beach

Re: 20 foot seacraft deck

Post by Jeff »

Nice logo!!!! Jeff

Dan_Smullen
* Bateau Builder *
* Bateau Builder *
Posts: 912
Joined: Tue Aug 13, 2019 3:02 pm
Location: VA

Re: 20 foot seacraft deck

Post by Dan_Smullen »

Digging the leaning post!

Could be room for a few rod holders on the back.

boguesounder
Frequent Poster
Frequent Poster
Posts: 171
Joined: Sat Mar 08, 2014 9:51 pm
Location: United States

Re: 20 foot seacraft deck

Post by boguesounder »

Leaning post looking sweet. As is the CNC logo work. Nice...

lelandtampa
Frequent Poster
Frequent Poster
Posts: 111
Joined: Wed Jun 22, 2005 5:44 pm
Location: tampa

Re: 20 foot seacraft deck

Post by lelandtampa »

Query for the glassers. This is the tackle center going in the back of my leaning post. It needs to be removable so the flange will be screwed into the back of the leaning post with epoxy sleeved 1/4 20 thru bolts. What glass would you recommend for the box 1/4" Marine fir and flange 1/2 birch ply. I'm thinking 12 oz biax on inside seams 10 oz woven outside and 2 layers of 12 oz biax on the flange to box joint inside and out.
Image

Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 8921
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: 20 foot seacraft deck

Post by Fuzz »

The glass plan sounds like it will work just tine. Nice looking work there.

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests