Page 1 of 12

Lm18 madison wi

Posted: Mon Jun 10, 2019 10:39 pm
by Cbuf
Made some progress before a work trip. When I get back I will be gluing up the seems.
Thanks cbuf.

Re: Lm18 madison wi

Posted: Mon Jun 10, 2019 11:07 pm
by Fuzz
Nice looking work. I love it when it goes from a bunch of flat sheets of plywood to a boat looking thing :D

Re: Lm18 madison wi

Posted: Fri Jun 14, 2019 10:30 pm
by Jwhitakeriii
Very nice. You'll be in the water before you know it

Re: Lm18 madison wi

Posted: Fri Jun 28, 2019 1:15 pm
by Cbuf
I plan on getting the outside glassed up this weekend. Here is where I'm at. I need to learn some tricks of the trade from Capt ub as his glass is neat and mine is a mess. I guess it is part of the learning process. I'm planning for a better job on the inside, and dealing with hours of fairing on the outside.

Re: Lm18 madison wi

Posted: Fri Jun 28, 2019 3:53 pm
by fallguy1000
Peel ply
Masking tapes lifted on the drip side.

Pull tapes after gel time plus a bit.
Acetone wipe drips at the end.

Re: Lm18 madison wi

Posted: Thu Jul 04, 2019 7:08 pm
by Cbuf
I finished the glass schedule on the bottom. I started fairing a small section to make sure I was doing it correctly. After the holiday weekend I'll be back at it. Based on the plan there are 2 strips on the bottom with one ply of fiberglass. I decided to fill that in with more fiber glass. It was that or a bunch of fairing to bring it level. I also made a cool flexi le sander, I'll post those pics in my next post.

Re: Lm18 madison wi

Posted: Tue Jul 09, 2019 9:08 am
by Cbuf
next batch of pics.
20190708_192302.jpg

Re: Lm18 madison wi

Posted: Tue Jul 09, 2019 9:15 am
by piperdown
You've got some solid progress going on :D

Re: Lm18 madison wi

Posted: Tue Jul 09, 2019 10:14 am
by Jeff
Really nice progress Cbuf!!! You are moving really fast!!! Jeff

Re: Lm18 madison wi

Posted: Mon Jul 15, 2019 8:54 am
by Cbuf
Continued Fairing
Forgot to clean my tools
Sharpened the edges