Flat skiff 12 plywood specs

Please see our tutorials and FAQ before posting.
kiwi_guy
New Poster
New Poster
Posts: 2
Joined: Mon Oct 18, 2021 8:35 pm
Location: New Zealand

Flat skiff 12 plywood specs

Post by kiwi_guy »

Hi all,

Mostly just wanted to introduce myself as I'm guessing I will have a few questions.

I've just purchased the flat skiff 12 plans and noticed that the plywood specs in the drawings specify 6mm and 10mm ply, while the study plans say 6mm and 9mm.

I have not come across 10mm ply in NZ so assuming that the 9mm is correct?

Regards from NZ

Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 8920
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: Flat skiff 12 plywood specs

Post by Fuzz »

Welcome to our little fun place :D
Yep 9 and 10 mm plywood are the same in this case. I think JM said in the past 10mm was made but not any longer.
Ask as you go, I am sure you will get answers. Some of them might even be correct :lol:

kiwi_guy
New Poster
New Poster
Posts: 2
Joined: Mon Oct 18, 2021 8:35 pm
Location: New Zealand

Re: Flat skiff 12 plywood specs

Post by kiwi_guy »

Thanks Fuzz, thought as much.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests